How to open the Hot Tub cover?
Step 1- Open the gate all the way and unhook the lock which hook the cover to the dock,
Step 2- Stand in the left side on the hot tub on the deck and and fold the cover on top of the bar, this way you uncovered front half of the hot tub.
Step 3- Go into the Hot Tub, push the cover with bar underneath to open all the way back – it slide easily with the bar so you do not have to left the cover away from the hot tub.
How to close the Hot Tub cover?
After each use you will need to close the cover so no bugs will go into the water and preserve the water temperature.
Step 1: Go into the tub and pull the cover with bar towards you. This will cover half of the tub.
Step 2: Get out of the tub, move to the left side of the tub and flip the top half of the cover to cover the rest of the tub.
Sept 3: Hock the hot tub cover, it is important so the wind will not open the cover.
How to Use the Hot Tub Controls?
To run the JETS,
Press the “Jets” button once to activate the low speed of the pump and
again for the high speed. Press the “Jets” button again to turn off the
pump. If left running, the low speed of the pump will automatically
turn off after 4 hours, and the high speed will automatically turn off
after 15 minutes.
The Temperature of the water can go up to 40c, if you pressed the “Temp” button and then the “Light” button. The temperature goes to sleep mode.
Here is the different “MODEs” the hot tub can go through.
The mode is changed by pressing the “Temp” button, then pressing the
“Light” button. The hot tub should be in “Standard Mode” all time.
After each use, make sure the hot tub cover is closed and securely on the hot tub. The bar should be on top of the cover and lock should be in place.